4.8 KiB
| title | chunk | source | category | tags | date_saved | instance |
|---|---|---|---|---|---|---|
| Atmospheric-pressure photoionization | 2/2 | https://en.wikipedia.org/wiki/Atmospheric-pressure_photoionization | reference | science, encyclopedia | 2026-05-05T13:41:26.298091+00:00 | kb-cron |
== Advantages == APPI is most used for LC/MS although it has recently found widespread use in ambient applications such as detection of explosives and narcotics compounds for security applications using ion mobility spectrometry. Compared to the more commonly used predecessor ionization sources ESI and APCI, APPI ionizes a broader range of compounds with the benefit increasing toward the non-polar end of the scale. It also has relatively low susceptibility to ion suppression and matrix effects, which makes APPI very effective in detecting compounds quantitatively in complex matrices. APPI has other advantages including a broader linear range and dynamic range than ESI as seen by the example in the left figure. It is also generally more selective than APCI with reduced background ion signals as shown in the right figure. This latter example also highlights the benefit of APPI vs. ESI in that the HPLC conditions were for non-polar normal-phase in this case using n-hexane solvent. ESI requires polar solvents and further hexane could pose an ignition hazard for ESI and APCI that use high voltages. APPI works well under normal-phase conditions since many of the solvents are photoionizable and serve as dopant ions, which allows specialized applications such as separation of enantiomers (right figure).
Regarding applicability to a range of HPLC flow rates, the signal level of analytes by APPI has been observed to saturate and even decay at higher solvent flow rates (above 200 μl/min), and therefore, much lower flow rates are recommended for APPI than for ESI and APCI. This has been suggested to be due to absorption of photons by the increasing density of solvent molecules., However, this leads to the benefit that APPI can extend to very low flow rates (e.g., 1 μL/min domain) allowing for effective use with capillary LC and capillary-electrophoresis.
== Application == The application of APPI with LC/MS is commonly used for analysis of low polarity compounds such as petroleums, polyatomic hydrocarbons, pesticides, steroids, lipids, and drug metabolites lacking polar functional groups. Excellent review articles can be found in the References.
APPI has also been effectively applied for ambient ionization applications lending itself to several practical configurations. One configuration termed desorption APPI (DAPPI) was developed by Haapala et al. and is pictured in the figure here. This device has been applied to the analysis of drugs of abuse in various solid phases, drug metabolites and steroids in urine, pesticides in plant material, etc. APPI has also been interfaced to a DART (direct analysis in real time) source and shown for non-polar compounds such as steroids and pesticides to enhance signal by up to an order of magnitude for N2 flow, which is preferred for DART because it is significantly cheaper and easier to generate then the higher performing use of He. Commercial APPI sources have also been adapted to accept an insertable sampling probe that can deliver or liquid or solid sample to the nebulizer for vaporization and ionization. This configuration is similar to atmospheric solid analysis probe (ASAP) that is based on the use of APCI and therefore is referred to as APPI-ASAP. The benefits of APPI-ASAP vs. APCI-ASAP are similar to those observed in LC/MS, namely higher sensitivity to lower polarity compounds and less background signal for samples in complex matrices. Though ambient ionization has experienced a renaissance in the last decades, it has been used in the security industry for many decades, for example in swab detections at airports. The swabs collect condensed phase material from surfaces and are then inserted into a thermal desorber and ionizer assembly that then flows into the ion detector, which in most cases are an ion mobility spectrometer (IMS), but in later cases have been MS analyzers. A picture of a swab-APPI-IMS system used in airports and other security venues is given in the left figure
In fact, a swab-APPI-MS system designed for explosives and narcotics detection for security applications performs very well for all types of ambient analysis using a sampling wand and swab (right figure). A particular demonstration (unpublished) showed excellent sensitivity and specificity for detection of pesticide compounds on a variety of fruits and vegetables showing detection limits for 37 priority pesticides ranging from 0.02 to 3.0 ng well below safe limits.
== See also == Atmospheric pressure chemical ionization Chemical ionization Corona discharge Electrospray ionization Secondary electrospray ionization
== References ==